Detecting on side of roads (NSW)?

[Dusttodust]

Hi Guys, just a question, can you detect for gold on the edge of a road? Also I have noticed on maps that there are areas shown as roads (as per attached) that do not exist, can you detect on these areas, they don't have any lot or DP numbers? are they council land, road reserves? Thanks

 

[Mackka]

Not sure but I would hazard a guess and say that it would be against the law to dig next to a road however, i don’t think anyone would mind if you walked the road fringe for exercise looking for a gleaming pebble but without detector. The brains trust on here will give you the definitive answer. Cheers Mackka

 

[EVIE/BEE]

First step.
Call the council to find out if the roads are gazetted that means the council is responsible for maintaining the road.
Go from there.

 

[davsgold]

First step.
Call the council to find out if the roads are gazetted that means the council is responsible for maintaining the road.
Go from there.

sometimes it is easier to beg forgiveness than ask permission

 

[mbasko]

Roads in NSW are managed by Transport for NSW &/or Local Councils depending on classification (State, Regional and Local) & arrangements between Transport for NSW + Councils.
You would need to check with one or both depending on road classification & area, but I doubt either would give permission given one of the reasons NSW Councils won't allow wood collecting etc. on road verges is safety.
See #4

 

[OzzieAu]

IMHO road verges, particularly wide ones >10 metres between bitumen/ gravel and any boundary fences should be fair game if you leave the ground as you found it. Just park in a safe, unobtrusive spot, like anyone on the roads who pulls up for a comfort stop would do. Who’s likely to be policing such activity anyway.... see post #4

 

[mxt sniper]

I have found quite a bit of small gold next to haul roads near scrapes. Out to about 8 ft from the rd edges.

 

[Bidgee]

Your images show an unused road enclosure. Where these fall within a larger rural property they are used by the landholder, mostly via a lease from the State govt. There has been a program in place where landholder can buy the road enclosures and a lot have done so. I wouldnt access them without landholder permission.

I've not detected in road verges but I've dug samples from quartz veins in road cuttings.

 

[Dusttodust]

First step.
Call the council to find out if the roads are gazetted that means the council is responsible for maintaining the road.
Go from there.

These days it getting harder to get info form my local council than to find large Nuggets!

 

[Dusttodust]

First step.
Call the council to find out if the roads are gazetted that means the council is responsible for maintaining the road.
Go from there.

that's like Tinnitus ! ring,ring,ring

 

[Bush]

and their answering service responds with your call is being diverted.

but back onto your topic does is it really about what you can / cannot or should not do.
Road shoulders are usually 1. 2 meters wide no driver is going tobe happy with hazards like pick & shovels or folk
wobblling around on any road side verge.
In the event of a mishap who is going to take the liability most likely the driver.
In regards to local councils they would not be happy having graded & rolled road shoulders underemined as heavy rain will potentially degrade the disturbed ground effecting drainage of gutters.
If the question was directed to Road & Transport the answer would be a definate No.
What you do is not always your own bussiness when it has the potential to negatively effect others.
We all would like to have a go on road edge detecting but seriously and imagine if evereyone was in on it.
A traffic hazard nightmare it would be for drivers.
A Definate No.