New Gold Finder 2000

[The Kof]

Does anyone know of a stand that will fit the gf 2000 .

 

[bicter]

Is this the detector you're asking about?
https://www.detect-ed.com/products/gold-finder-2000

Looks like it has a basic stand as supplied.
I think you will need to come up with a solution yourself.
I'd be having a look at the various stands that are available for the Minelab SDC 2300 for ideas.

 

[The Kof]

No stand supplied . Tried my impact stand but won't stay put .

 

[stevenj48]

No stand supplied . Tried my impact stand but won't stay put .

the easiest stand for detectors is the bunnings clamp can get the in the right size for your machine they work well
https://www.bunnings.com.au/trojan-100mm-spring-clamp_p0319718?store=6429

 

[The Kof]

the easiest stand for detectors is the bunnings clamp can get the in the right size for your machine they work well
https://www.bunnings.com.au/trojan-100mm-spring-clamp_p0319718?store=6429

Thanks mate . Shall try that .

 

[ronniecruisin]

Or....... You could simply 3D Print one to fit perfectly.

 

[XLOOX]

Possibly a previously undiscovered use of the word "simply" ?

 

[ronniecruisin]

Ohhhhhhhhhhh. Its not too difficult. I 3d printed a lot of the stands for the QED. That way you can make em as wide and stable as you want.

 

[XLOOX]

Ahh but first I would have to figure out what I wanted and figure out how to design it for 3D printing, then learn Autocad then design the stand, then figure out what plastic I needed and then what 3 D printer I needed then buy them then learn how to use it then learn G code then programm the printer then make it and THEN I might have a stand.
Simple !

 

[OzzieAu]

This might be simpler....
http://phasetechnical.com.au/product/universal-detector-stand-folding/

 

[The Kof]

This might be simpler....
http://phasetechnical.com.au/product/universal-detector-stand-folding/

Nope , tried that

 

[PhaseTech]

Kof said: "Tried my impact stand but won't stay put ."

The Impact stand is designed to fit on the section of shaft between the armrest and handle on the Impact.

This section is all moulded on the Anfibio and Gold Finder 2000, so the stand will go on but it stretches out too far and you can't get the bolt through. You can use it on the metal shaft in front of the handle, you just need to beef it up a little bit with some sticky foam tape. Then it fits like a glove. I'll attach some photos.

 

[PhaseTech]

I used some thicker tape on the bottom and some thinner tape on top and works great.

 

[The Kof]

Ok that looks the go . Now if I could only find another impact stand .

 

[PhaseTech]

Ok that looks the go . Now if I could only find another impact stand .

I've got one left in stock.

 

[Jaros]

Your a great member Nenad.

 

[The Kof]

A huge thanks to Nenad at Phase Techical . Finally got a stand and cover for the gf2000 .