How limited is a 4500 compared to 6000

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 31, 2024
Messages
18
Reaction score
10
Location
South Australia
It has been many years since I detected in WA with 4500 and planning a trip next year. I have been studying with books and videos on using the 4500 and now realise I wasn't using it to it's full potential back then due to lack of knowledge on its settings.
My question is how does a 4500 being used by an experienced operator compare with a 6000?
Finance doesn't allow me to update so have to make the most of what I have. Does signal enhancement and coils with flat windings make an improvement? Any advice appreciated. Thanks.
 
My question is how does a 4500 being used by an experienced operator compare with a 6000?
Just as good if not slightly better on larger chunky gold. Won't touch the 6 on very small bits.

Finance doesn't allow me to update so have to make the most of what I have. Does signal enhancement and coils with flat windings make an improvement?
Having a good audio set-up definitely helps to hear those really iffy threshold variations, and flat wound coils increase sensitivity, as long as ground mineralisation doesn't work against you.
 
According to my old mate in Magnet, his modified 4500 is better than a 7000 and a 6000, and as I bought his 7 a couple of years ago, which I must say,I found quite a bit of gold and I loved using, I used his 6 this year while he was using and testing his suped up 4500 and I can testify that his moded up 4500 found more gold in weight than the 7 and the 6 combined, and he didn't put in as much time as I did.
 
According to my old mate in Magnet, his modified 4500 is better than a 7000 and a 6000, and as I bought his 7 a couple of years ago, which I must say,I found quite a bit of gold and I loved using, I used his 6 this year while he was using and testing his suped up 4500 and I can testify that his moded up 4500 found more gold in weight than the 7 and the 6 combined, and he didn't put in as much time as I did.
What were the mods to your mates 4500 and who did them?
 
When I went to WA i used the 6000 for scouting out patches as its very light and can cover ground quickly. It can find little pieces easy the smallest was a ball the size of the ball in a ball point pen. Although i didn't find any bigger gold with the 6000 biggest being 1.9g. On one patch the gpx5000 yielded a 39g hiding at depth that the 6000 didn't see. A gp or gpx4000 or 4500 would find it too. Although depending on operators hearing. Both machines are good combination. The gpx5000 or a 4500 could still find smaller gold but not the tiny ball point pen piece and the 6000 can find larger gold it just depends on the targets initial depth and ground matrix.

As for coils it does make a big improvement with 4500 as a bigger coil will have more punch than the limitations of the 6000s smaller coil option. The 14dd was handy on 6000 in some areas where ground was noisy due to mineralisation. I don't use signal enhancing devices like steel phase... and I mostly use a 17x13 coil on gpx5000. I also took my 25 xdd coil too.
 
Last edited:
I have a 11" X COIL ON MY 4500. WORKED IT NEXT TO A MATES 6000 AND IT WAS PICKING UP ALL THE SMALL WHITE BIRD SHOT THE 6000 WAS GETTING , THAT THE OTHER DETECTORS MISSED. I have a 6000 now because of the les weight, still like the 4500 for big coils, but for less time detecting. With the spo1 it is a mean bit of gear.
 
My question is how does a 4500 being used by an experienced operator compare with a 6000?
Just as good if not slightly better on larger chunky gold. Won't touch the 6 on very small bits.

Finance doesn't allow me to update so have to make the most of what I have. Does signal enhancement and coils with flat windings make an improvement? Having a good audio set-up definitely helps to hear those really iffy threshold variations, and flat wound coils increase sensitivity, as long as ground mineralisation doesn't work against you.
Agree with Phase tech on those.
Detecting in WA also requires coverage of large tracts of ground, and you need to be able to cover those tracts for long periods without tiredness creeping in to spoil your technique and concentration. When that happens, you lose the ability to pick up on targets that possibly other operators before you may have missed.
Before spending big bucks on mods, I'd suggest looking at something like a 12" Nugget Finder Evo.
This would be a coil size which would still be easy to swing for long periods. Also being a flat wound coil and slightly larger than Minelab's standard 11" size you could expect improved depth and also an edge in sensitivity too.
Before you go also make sure that whatever you take, you have the utmost confidence in your detector, the settings you run, the coil you have on, and your technique to hear and recognise a genuine target at a reasonable depth. So go out and do some tests to ensure that if your coil is passed over a nugget of a given size you will hear it at a satisfying depth. It will be much the same over in WA.
Lack of confidence can be a killer.
When I bought a machine, I think it was even a 4500, I attended a training day in Talbot, Vic. After we had all returned for lunch, the instructor told us that he had planted a very small nugget close to our lunch area. Some of the more experienced of us had already found nuggets and the instructor picked on someone who had been having some doubts in his ability to identify a real target with the 4500. After checking the guy's settings (close to factory I think) the trainer told him that if he could find the nugget, he could keep it. We all sat back and watched this person detect the area, the difference in his technique was profound, and he found it easily.
Best lesson I ever had about detecting by just watching.
 

Latest posts

Top