mozzie1957
Wayne Blyton
I've fitted my F1A4 with a coil plug and a headphone jack. No problem there.
I've fitted a momentary button, to the handle, to use when ground balancing.
Now , my problem. I've wired this as in the following diagram, same as in
downhalo's post, but when I use the button the machine switches on, if off,
and off if on. Gotta be something dead simple but it's eluding me. The chassis
mount, and jack, are mono. I mean, this is only 2 wires for heaven's sake.
And the wires going to the PCB? Red is on/search, Blue is balance and the
bridged yellow is Common or so the manual says.
I want to be able to press the handle button and have this machine start
ground balancing. Not switch off.
I've fitted a momentary button, to the handle, to use when ground balancing.
Now , my problem. I've wired this as in the following diagram, same as in
downhalo's post, but when I use the button the machine switches on, if off,
and off if on. Gotta be something dead simple but it's eluding me. The chassis
mount, and jack, are mono. I mean, this is only 2 wires for heaven's sake.
And the wires going to the PCB? Red is on/search, Blue is balance and the
bridged yellow is Common or so the manual says.
I want to be able to press the handle button and have this machine start
ground balancing. Not switch off.
