Today I MADE
- Thread starter Nugget
- Start date
Help Support Prospecting Australia:
Moneybox
Philip & Sandra Box
Today, well over the last few days, I made a waste oil heater. It needs a good clean up and fireproof paint now because all the paint has gone. I've only used items from my scrap pile so some improvements could be made but perhaps later.
silver said:
She will be ,once i send the before and after pics :lol:
At least it turned out right(perfect) ... Unlike the chicken i burnt for dinner 8.(
G
Guest
Hey moneybox' I like the waist oil heater mate! One of my mates made one a few years back with a regulator and aircomp feed from underneath the air was blowing up towards heat bricks that sat in a oil bath got the top glowing red hot usually ment a cold winter in his shed ended with the dart board outside as it was too dam hot in the shed.
Sounds like mrs dwt in the house, damm, the girl burns wood like she hates the stuffZuke_Lynzy said:
2 deg outside n I'm in shorts and t-shirt inside borderline sweating my ass off, and it's the same night after night after night :/ The new 395XP husqy is paying for itself anyways
Yep, Mrs Chewy and the teenwooket had the heater blasting today, I'm in a t shirt sweating. Lucky it's gas and I could turn it down.dwt said:Sounds like mrs dwt in the house, damm, the girl burns wood like she hates the stuffZuke_Lynzy said:
The new 395XP husqy is paying for itself anyways
Moneybox
Philip & Sandra Box
Yeah I looked at air feed but it was way too noisy. Even with the normal convection it makes more noise than I was counting on. It takes about 10-15 minutes to make about 500 Deg C at the lower burn chamber (half of an old CO2 fire extinguisher) and the bottle (AC Gas) runs at around 300-320 Deg C. All the paint has blistered and burned black so now I need to sand it all back to bare metal and coat it well in fireproof paint.
I'm too busy now swapping the engine in the old bus so we can get to the muster on time. The engine I bought is six years newer than the old one so I have a few wiring issues to deal with once it's put together.
I'm too busy now swapping the engine in the old bus so we can get to the muster on time. The engine I bought is six years newer than the old one so I have a few wiring issues to deal with once it's put together.
- Joined
- Jul 5, 2015
- Messages
- 7
- Reaction score
- 11
Was not made today , but last week .... Works a treat !!!
joao garimpeiro
Joo Novaes Neto
Sandta said:Today i made a 'key lime pie'
https://www.prospectingaustralia.com/forum/img/member-images/3188/1436005007_image.jpg
... YUMMO ...
Im feeling fatter already
delicious
please send the recipe for me
Gday Joao , turn on your PM system
So i can send the recipe through to you
So i can send the recipe through to you
Whats that fold in the middle of the shovel mate.Stuart Parry said:
Jaros
- Joined
- Jul 5, 2015
- Messages
- 7
- Reaction score
- 11
haha if it's the one I'm thinking your talking about , it's just the sticker
Never thought about the mate??!!
joao garimpeiro
Joo Novaes Neto
Sandta said:
Thank you mate,
enabled private messaging system.
I'm looking forward to the recipe
- Joined
- Jul 6, 2015
- Messages
- 104
- Reaction score
- 270
kawman said:Most old car speakers have a vert strong magnet in the back of them.... Maybee good for black sand..
Magnets out of computer hard drives are rare-earth and come in 2's (Wickedly strong, don't get your fingers caught between them) and easy enough to come by.
There are some you-tube vids on how to remove them - google removing hard drive magnets
Similar threads
