Today I MADE

[ctxkid]

Plough disc ....its not a easy thing to get..

Went and seen some local farmers, they don't have any,

One said most people turn them into BBQ plates,

Went to 3 Engineering places and they had none,

But told me the same old story the farmers told me,

At lease I am trying to give it a go,

Goody

the local farm machinery supply will sell em singly, not too expensive

 

[goody2shoes]

Yep I all so asked farm machinery guy..with no luck...

But thanks ctxkid .....

 

[goody2shoes]

May just have to get a leaf spring and make one up...

 

[goody2shoes]

Thanks 7.62 marksman,

Sent message to the eBay person, but will not post,

Goody

 

[goody2shoes]

Its Royal pain in the ......

Eldorado' sounds like we up the same creek with out a paddle

At lease we are trying ...

Goody

 

[ctxkid]

Yep I all so asked farm machinery guy..with no luck...

But thanks ctxkid .....

buy a 'new' one , they are bigger, not worn ones

 

[goody2shoes]

I came across a old hoe that a very old bloke made for me

In the shed behind a lot of other stuff,

Would have to be 30 years old by now,

I'm going to take the angle grinder and sharpen up one end of it,

Reshape the other end,

There you go I have turn something that I don't use all that much into my new pick....plus it will be kind of light weight for me to use,

A lick of black paint, and it will look the part, ickshovel:

Find some of my old screwdrivers and do kind of the same to them.

Will have the tools to get that gold out of the tight spots, :goldnugget:

Not to bad I say for a old women

Goody

:goldpan:

 

[Jaros]

Goodonya Goody. Hope it works out.

 

[Dave law]

Dont forget to post some pics of your handy work. :Y: erfect: Cheers.

 

[goody2shoes]

I would Dave Law..

but I'm using my mobile phone since my laptop don't work.anymore.

Goody

 

[Goldchaser1]

Well i didnt make anything but resprayed the diff out of my fx,bogan shed job......

 

[Manpa]

Shineeeeeeeeee

 

[aussiefarmer]

Thats a nice shade of :goldnugget: :Y: :Y:

 

[Goldchaser1]

Yep golds allways on the bottom
Had to replace the pinion seal,so all seals then sandblast,it was a show car in the early 80s and still looks good so no choice but to do it properly but every seal or bit of rubber on the old girls showing its age,so starting at the back and working foward,all 2 pac paint underneath but its just a cruza from time to time now so im just gonna rattle can acrylic the best i can on any bits underneath that get worked on.....

 

[aussiefarmer]

:inlove:

 

[Muk]

Gday all was mucking around in my shed and knocked up a miller table seems to work ok put some shotgun pellets through it then some tiny bits of gold mixed in with sand they all stuck basically were I dropped the mix so should be ok I used some thin rubber for the surface of the table and a 12volt bilge pump cheers Muk.

 

[Rockhunter62]

Yep golds allways on the bottom
Had to replace the pinion seal,so all seals then sandblast,it was a show car in the early 80s and still looks good so no choice but to do it properly but every seal or bit of rubber on the old girls showing its age,so starting at the back and working foward,all 2 pac paint underneath but its just a cruza from time to time now so im just gonna rattle can acrylic the best i can on any bits underneath that get worked on.....
https://www.prospectingaustralia.co...0824_efc4f2b2-a64b-4193-88d9-2efb346a413e.jpg

Struth Dave,

That doesn't look like your shed.

Cheers

Doug

 

[Goldchaser1]

Yeah lol,the pic i was sent when i bought it :/

 

[Muk]

Gday all had some spare time today so decided to cut up a couple of the ag points I scored into rough blanks for picks got quite a few out of them will do the final shape and sharpen on my works linnesher I will have some fore sale if anyone is interested they wont be very pricey thinking I might rock up at the lannecorrie bash with them if thats aloud I also have made some silly pots any way have a look at the blanks wont look like this shortly cheers Muk.

 

[Muk]

Meant to say dolly pots cheers Muk.