MinView - Leads and Workings Detail

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 17, 2022
Messages
2
Reaction score
3
I'm curious if the NSW MinView (or any other resource) has Leads and Workings Detail like the Victorian tool GeoVic. The NSW Doug Stone gold maps have these on them so the data is out there somewhere.
 

Attachments

  • Screen Shot 2022-04-01 at 12.11.09 am.png
    Screen Shot 2022-04-01 at 12.11.09 am.png
    4.1 MB
I'm curious if the NSW MinView (or any other resource) has Leads and Workings Detail like the Victorian tool GeoVic. The NSW Doug Stone gold maps have these on them so the data is out there somewhere.
Unfortunately there is no layer on Minview. No doubt they exist somewhere & it could be done as per Geovic.
I usually look up the area of interest searching for NSW Heritage/Goldfields, Geology/Metallogenic, Parish & various versions of topo maps. There's never been any one map or method that shows info for all areas though.
For example some topo maps I use show some areas (as dotted outlines) but nearby there is nothing. Below is an area between Windeyer & Pyramul (Private Property) but there are more areas relatively close by that aren't shown.
Screenshot_20240702_163501_Australia Topo Maps.jpg

Takes a bit of time, research & piecing together for each specific area. Would be great to have on Minview like it is on Geovic.
 

Latest posts

Top