Minelab GPX4000 tips, settings, questions

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
They're here! now if only the bloody rain would quit for a couple hours...

1590456064_new_coils.jpg
 
My father has found many .1s and even a .08g with his 4000 and 14" elite. It's an awesome setup.
 
Hi Ihave had the 9 elite on our 4000 for a week now and this was our first nugget found yesterday.I have set the freq low and turned the gain down, otherwise it was very noisy and would react to every bump.It is very sensitive to mineralised ground but you can hear the difference it just takes a little getting used to. I think there is some more fine tuning to come.....the .2 nugget below was about 4" down on a mullock, the 9" elite picked it up easily. It also picks up mineralisation a lot, this is the only issue we are having. Maybe that's just how it runs with this machine.........I am interested to hear what settings you have found work best with yours, we are in Melbourne and frequent Heathcote alot
1592281055_8fb59e72-9cf6-4755-bd1e-8deb0faaf95b.jpg
 
Top