Help Support Prospecting Australia:
Hey heatho i seen your goldie pattern you made and it seems very tight .If i went over a piece of metal in the ground that was in the disced out pattern and there was a goldie near it would the ctx still see the goldie or would the greyed out piece of metal hide the coin ?.
Depends what target separation type you are using and also depends on how close the other piece of metal is. Have a read in the manual about "target separation" on pages 41-42 as it explains it much better than I can, it's quite important for successful hunting with the CTX.
I generally use "high trash" and flick into "ferrous coin" if I suspect a good target is being masked by iron trash.
I generally use "high trash" and flick into "ferrous coin" if I suspect a good target is being masked by iron trash.
Daniel901 said:
Only way to be sure is to dig it up. Aluminium screw caps are one of the main types of junk you'll see in my junk bucket, not much can really be done about them if you don't want to miss any goldies.
- Joined
- Feb 26, 2015
- Messages
- 661
- Reaction score
- 1,140
Well yesterday I was doing a new park and after 2 and a bit hours my CTX screen did a couple of crazy little things then gone. The machine still works but the screen will not fire up at all, was on a bit of a goldie patch too. It will be in the post on Monday so hopefully I wont be without it for very long, going to have to resort to using the Deus 
- Joined
- Jan 11, 2015
- Messages
- 5,296
- Reaction score
- 9,479
nice goldie haul
Very nice haul mate, pity about the screen, that would be annoying to say the least. Hope you get it back quickly.
AngerManagement
Repairs + X-pointers
Be interesting what they say is the Cause / Fix.
Maybe it did not like all the Goldies
Maybe it did not like all the Goldies
- Joined
- Sep 4, 2014
- Messages
- 8,938
- Reaction score
- 6,786
goldwright said:Well yesterday I was doing a new park and after 2 and a bit hours my CTX screen did a couple of crazy little things then gone. The machine still works but the screen will not fire up at all, was on a bit of a goldie patch too. It will be in the post on Monday so hopefully I wont be without it for very long, going to have to resort to using the Deus
https://www.prospectingaustralia.com/forum/img/member-images/4651/1472245322_coins.jpg
Well as you know they will take care of and I'm sorry to hear that the screen went south, but the good news is this is only the 2nd time I have heard of this happening so it is an extremely rare thing to happen,
good luck, John.
- Joined
- Feb 26, 2015
- Messages
- 661
- Reaction score
- 1,140
Yeah checked it all. Un plugged and plugged back it. Plugged a Z battery into it just in case the battery had dropped voltage or something too.
AngerManagement
Repairs + X-pointers
Check USB for crap / moisture ?
Now if ML take awhile to repair the CTX, you may find you`ll spend enough time with the Deus to get the hang of it. Give it a good work out, your arm will appreciate the break at least. I`ve only used a CTX briefly thus I`ve not the experience to compare (except on weight), but you may be soon, might give ML a call and get em to delay repairs, or hold up Cobb & Co and abscond with it............
- Joined
- Feb 26, 2015
- Messages
- 661
- Reaction score
- 1,140
Norvic said:
The Deus is good, it just has to prove itself. Plus when I am chasing coins I like to pretend the CTX is the GPZ and the $2 coins are nuggets, kind of hard to do that with the little light weight Deus.
Ah ha, goldies the substitute nuggets. The Deus`ll prove itself no worries, just is a different machine, I suspect, but very capable. Tis a good change from the Z, I`ll chase goldies tomorrow. The GoG is starting to understand, gold is King but goldies are not to be sniffed at. GoG= Goddess of Gold, the Mistress we obey, no question???????????????????
goldwright said:
Just paint a Brick Blue and attach it to the shaft under your arm, It'll fell Like a 7000 at least.
Happy Hunting mate, Full tone that baby and you'll love it.
Clegy
There you go, that blue brick will do the job for sure, combined with full tones. Nah, the lad`ll get the hang of it, has to have his goldie hit especially on a Sunday. Just have to sabotage that monstrous pick he carries when Z`ing too.
Goldwright, what did Minelab end up doing for you? Replace? Free? Charge?
- Joined
- Feb 26, 2015
- Messages
- 661
- Reaction score
- 1,140
I have run 2 batteries through the CTX now and works fine. I think my screen was going for awhile with blue colouration in the corners when on trashy sites and sometimes a trace dot staying for a bit once coil was lifted away from ground. Minelab only had it for 5 working days and took nearly 14 working days to get there and to come back one of the draw backs of living in North Queensland. Still prefer the CTX over the Deus though but the Deus is still a great machine just dont like the EMI chatter as the CTX just hums along no matter where you are.
Glad you got it sorted out GW. Happy swinging.
