V 1.06 software is now available for the Legend.
Updates Made:
1. Beach Mode Multi-W and the Pinpoint in this mode has been improved and updated.
2. Bluetooth headphones pairing criteria have been updated. The device will now search for the headphones it has been paired with initially and try to connect to those. This will prevent the device from connecting to other Bluetooth devices when the Bluetooth setting is on. If you want to pair the device with different Bluetooth headphones (other than those it was initially paired with) you must delete them from memory as explained in the manual.
3. The sensitivity value will now be displayed also in the Target ID section.
4. The ground phase value calculated through automatic ground balance as well as tracking will now be saved.
5. Multi-1, Multi-2, Multi-D, Multi-W frequencies will now be saved. The device will start with the last frequency used.
6. The default Number of Tones for Park and Beach modes have been changed to 2.
7. The default Tone Volume level of ferrous tone has been updated per each mode.
8. The Ground Balance menu icons and the tones have been updated.
9. The battery bar levels have been updated to be more linear.
10. Bugs have been fixed.
I did a short hunt and a few tests on wet sand with the new software. Playing around with the main settings, I found Beach Mode, Multi Wet, Sens 22, Stability 2, Recovery 4 to work very nicely.
Pin-point mode does seem to be working better. 10. "Bugs have been fixed" - I never noticed any bugs, so can't say if any have been ironed out.
Had a short detect, and got a soft repeatable tone.... scraped off some sand, and yep definitely a target. I had to have three digs at it before I got it out of the hole, and it was a very crusty half a pull tab. I was expecting a big coin or half a can at that depth, so that was impressive.
Dug a $2 at about 10" and it was a solid signal with a stable ID. Will report more when I get some more time in.