GPZ7000: Info, Tips, Finds
- Thread starter PhaseTech
- Start date
Help Support Prospecting Australia:
Hi Hermann, at a guess based on my AKG earbud headphones, I'd probably be on 11 or 12.
Nenad, do you find the earbud style better than the stock Koss headphones that come with the Z?
- Joined
- Jul 15, 2014
- Messages
- 196
- Reaction score
- 262
Hi
I have been reading this tread and found it most informative.
I have a 5000 ( 50/50 with a mate ) and have now got the ear tuned for lead / gold.
I am thinking about the 7000 and would be interested in your feedback.
Is it worth the upgrade?
I can only get out from time to time in the GT area.
thanks scotty
I have been reading this tread and found it most informative.
I have a 5000 ( 50/50 with a mate ) and have now got the ear tuned for lead / gold.
I am thinking about the 7000 and would be interested in your feedback.
Is it worth the upgrade?
I can only get out from time to time in the GT area.
thanks scotty
SteelPat said:
I nearly always use the Sunray Pro Gold headphones. Most earbud headphones don't have much volume.
JayMowgrass
Jordan
Yeah I'm having success using low smoothing and cranking the sensivity up. Anything to stop it chattering.
Im also having to to a full reset a few times a day, it may be because I frequently swap between gold modes... is anyone else having to do this?
Im also having to to a full reset a few times a day, it may be because I frequently swap between gold modes... is anyone else having to do this?
In a spot I can normally run High Yield Normal with a low Sensitivity setting, usually around 6, today was just not happening as the ground is water logged. So I went to Difficult and it was super smooth. I progressively cranked the Sensitivity until I started to hear the ground - this was on 16. Only problem now was my threshold was going nuts so after a Noise Cancel I went to High Smoothing. Got zero targets, so back to Low Smoothing and Sensitivity 11, and I was quite comfortable with how it was running. Got rewarded with a 0.57 grammer.
Before digging it I tried Max Sensitivity, Zero threshold - not a peep! Also tried my usual settings and it was lost in the ground noise. The only other combo that got it was: General, Difficult, Smoothing Off, Threshold 23-26.
Before digging it I tried Max Sensitivity, Zero threshold - not a peep! Also tried my usual settings and it was lost in the ground noise. The only other combo that got it was: General, Difficult, Smoothing Off, Threshold 23-26.
JayMowgrass said:
Haven't done a full reset in weeks. If you're going to be swapping between gold modes, just do the ferrite balance for each mode at the start of your session, and you should be right to swap modes through the day.
JayMowgrass
Jordan
Ok ill give it a go. Cheers Nenad.
- Joined
- Nov 2, 2014
- Messages
- 194
- Reaction score
- 410
Why not just get used to working in extra deep?
It still sounds off on the small stuff just really hard to pinpoint.
I'm going to give it a go for the next few times .
If this mode even makes the ears question a noise ,you can always switch to general to check .
I went out for a couple of hrs yesterday with extra deep ,sensitivity 16 ,threshold 26 , difficult.
My .33 picker still sounded off and I found a few small targets @ 6" or so.
It still sounds off on the small stuff just really hard to pinpoint.
I'm going to give it a go for the next few times .
If this mode even makes the ears question a noise ,you can always switch to general to check .
I went out for a couple of hrs yesterday with extra deep ,sensitivity 16 ,threshold 26 , difficult.
My .33 picker still sounded off and I found a few small targets @ 6" or so.
- Joined
- Apr 29, 2013
- Messages
- 12
- Reaction score
- 4
Agreed Dug
I have found extra deep great in difficult ground and still pings the sub grammers
Pete
I have found extra deep great in difficult ground and still pings the sub grammers
Pete
Only if you're planning on swapping over regularly
Mickkat12 said:
Now with the new update, I would say auto, but haven't used the detector since updating.
