⭐ Show Us Your Cut Stones - Before And After Photos

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This is my first cab ever it a piece of boulder opal the kids got from a donation box.
1439220658_20150810_1219502.jpg
 
GallicProspector said:
A recut this time.

A citrine, with a cut typical from Asia/middle east, it had a huge window (it still has, but less disturbing) and it showed nearly no brilliance.
I lost 1mm (LxW went from 11x11mm to 10x10) in the process of recutting, but the stone is much more appealing now.

BEFORE:
https://www.prospectingaustralia.com/forum/img/member-images/441/1438674418_before.jpg

AFTER:
https://www.prospectingaustralia.com/forum/img/member-images/441/1438674439_after.jpg

That's an incredible improvement, makes me want to get some of my citrines cut.

Tom
 
G'day all,

You guys might remember seeing this stone before: it's an authentic Braz paraiba tourmaline that I had cabbed a while ago.

1447357976_tourmaline_1.jpg

1447357994_tourmaline_2.jpg

1447358007_tourmaline_3.jpg


Well I wasn't satisfied with both the finish and the clarity, so after thoroughly inspecting it and confirming it had better potential, I re-cut it, and I'm glad I did.

1447358022_tourmaline_4.jpg

1447358032_tourmaline_5.jpg


First no more surface fractures, and second a much better clarity and shine. For what it's worth, the crystal was 8 cts and the finished cab is 2 cts, giving a decent 25% yield, not phenomenal but the quality is way better than it was at 50% yield (first cut). I'll see if my jeweler of a sister is keen to mounting it onto, say, a ring (unless someone chimes in for a quote).

While I'm still at cabs, I'm also considering bringing something exclusively French to the market :cool: , more on that later (need to stock up before revealing ;) )

Cheers :)
 
that is some wicked work man, it love to get a trillion cut in amethyst from you if possible
 
Can do. What size is the stone ? Tried a few trillion in quartz , almost all look good . But my favorite needs to be at least 10mm to be able to work it . Will yours make that size or larger ?
 
AtomRat said:
Insane Kingsolomon! How many facets?

..you must play acoustic guitar with fingernails like that
Yeah I do , but don't cut nails cause need to hold small stone to preform , the lap keeps them trimmed just enough to make me not look Like a freak , yet make up for it in other ways with my appearance :)
 
Kingsolomon said:
Can do. What size is the stone ? Tried a few trillion in quartz , almost all look good . But my favorite needs to be at least 10mm to be able to work it . Will yours make that size or larger ?
i dont have the stone so was hoping you might have something? It doesnt have to be amethyst. I would like it to be around 15mm, what would something like that be worth? feel free to pm me
 
If want me to get something or use some of my rough no problem , 15 mm is an awesome size . I will look what I have and get back to you . But if want amythest that size might cost around , up to $100 just for rough of good color .
 
These are the cutters I have found out at the Gemfields of Central Queensland
1447934028_2015-11-19_21.37.47.jpg

Its hard to get the right light to show their true colour and beauty :D
1447934135_2015-11-19_21.29.48.jpg

The 5 orange ones on the left are zircons and the 5 on the right are sapphires.
1447934165_2015-11-19_21.28.41.jpg

Not too sure which one to get cut next, that might be the decision of the missus :)
1447934252_2015-11-19_21.29.15.jpg

Don't have the before photo for this, dropped it off to get cut almost straight after we dug it out of the ground has a nice deep blue colour, weighs in at just under a carat
 

Latest posts

Top