Search results

Well it is all about the context: A: When you have people digging parks in the city and getting into people faces AND then they tell you that have a Fossicking / Prospecting Licence . YEP that Fossicking licence allows you to dig with a pick any where it is Public Park !!!!! I did not know...

Aholes digging open plugs and leaving a mess and it is a Football ground and they dug up the field and left a mess and plenty of can slaw behind. This is a lease of Council property and the club is responsible for the grounds and any player that could twist an ankle OR worse while on the field...

Sounds like a simple problem - but one never knows until one can see and measure things. Am sure it would suit any number of people.

PSA is the easy bit... A digit exam is a little old school but does allow for that quick checks as to size. A tad of a worry when you feel it and then notice both of their hands on your shoulders. But as we get older that gland gets larger and that does not always mean the big "C". While over...

A few at the club could run through some settings BUT you need to be out in the field. Try David from the Open Range in Toowoomba as he is a ML dealer and have a few people that train / teach etc. BUT due to all the fires about - Not sure if people may be able to spare the time at the moment.

A few mates doing it tough and have lost lots. But still have their lives. Still too many fires started by the hands of idiots.

But all the FB posts with gold nuggets every day. Its on FB it must be true. Sorry; so over FB. There were a few good pages on Detecting / Fishing / Bees and Coin collecting. But these days 100001 people and a hard work to pick the real data/information between all the scammers / people...

Most times it is not diferent settings : it is just that the coil is being swung over new ground and or from a different direction. Does not matter how many times people get told Low and Slow; we all tend to rush and move quick and thus lots of targets are missed.

Our two did a lot of things and had chores too boot. Some were at NO pay as part of sharing the load - washing dishes etc. etc. But other things such as washing the car etc was a paid job. Once they did start some part time work; they had super accounts. Thus at tax time we tried to top up...

Kurra All good. Better to have a clean and smooth system rather than a fractured handle. I would still get a spray bottle of water and give it a good clean/wash out. The SDC2300 is waterproof and had mine under water a good few times. The trick is just using a non pressurised hose or a spray...

Sounds like you have dirt/dust on the two pressure pads that slide along the rod. They flex upwards and into the base of the handle and the module also rotates a bit. The movements are all very slight but works well when clean. I have pulled mine apart after lots of beach work, but that is not...

What he said... " If there is no protection, then a crowbar circuit should provide sufficient and fast protection. A fair description of the design and operation is provided here https://circuitdigest.com/electronic-ci it-diagram "

And for ***** and giggles Broken calibration thermometer - opps catch the silver stuff in ones hands. Why did my wedding ring turn silver.. All good, back to gold after a week...

The BMDC has been going for about 15 years. Meet the 3rd Thursday of every month. https://www.facebook.com/groups/BMDC1995/ Another started in or around gladstone. The issue for many is that once you register a club - then your obliged to follow all the rules and regulations other wise...

Item number 3 was replaced on the spot, as that is how it was out of the box at the shop. MinerDen well aware as is the ML rep. Miss treated NOT.

FYI 1: If you are dry land hunting and subject to the odd rain shower and or need to wash some dirt / mud off; then it should not be a problem 2: If you wading and using the pinpointer under water; then depending on the exact nature of the split/s you may be OK for a little while. But do not...

Firm and do not tighten up fully - The oring seals on the internal surfaces and puts extra outward pressure on the casing. Other systems the oring seals on the end surfaces and thus you need to tighten firmly. Do not add PTFE tape as that will just add extra to the thread and will add to extra...

Deepseeker - had to repair a couple of the newer Garrett AT Pros and when testing alongside the PF35; my experience was that the PF35 was much better at picking up small gold than the garrett. However like many things, variables and often there are differences between units of the same model.

Smoky FYI 2 replacement units were cracked out of the box at time of hand over. another unit had a very poor speaker and two would false and sound with a bit of a shake and just miss behave. Have sorted the misbehaving as due to bad solder joint. I use a lube and never do up hard - firm at...

I have been through about 5 PF35's and have now due to the theft of a trusty PF25 left with using the PF35 as my only ML pinpointer. Would not trust it at all in water as every one I have used and or had a close look at has split at the endcap. Once they get that sorted it may go in my every...