Yet another first gold with the SDC2300

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 18, 2013
Messages
586
Reaction score
477
I recently bought an SDC 2300 and took it with me on a trip to Tassie's west coast.

On the first day I detected 5 pieces, the largest of which weighed 0.2 grams only. Thanks to the detector, I found a crack in a creek bed that was covered in shingles and had not been recently cleaned out. I panned about a gram from just that crack. This was the first gold I found with a metal detector, yay!

Second day I went to a creek that's been worked thoroughly about 6 times over since the 1870s. I'd heard of someone recently finding a small patch of wash with gold in it, and took the SDC for a look. Sure enough in a few minutes I detected a 0.1 g small flake, and a couple of minutes later a 1.15 g piece. I found 3 very small bits, the largest 0.27 g in a remote creek that I could comfortably backpack the detector into. I can fit my tent, gear and food for 3-4 days in the bush, plus the SDC, into my 75 L pack. Total tally for the trip was 3 g.

I am amazed by the size of gold that the machine was detecting, mostly in the default sensitivity setting. Ten of the flakes in this picture were detected with the SDC 2300, and not all the bigger ones, some of which I panned. If you can afford it, I would highly recommend it. It used to be thought that Tasmania was not worth detecting for gold in, for lack of nuggets and remoteness of locations. I honestly think the SDC 2300 is changing both of those perceptions.

1424221057_10497930_10152632134506024_4091931751148867881_o.jpg


Cheers,

M
 
Top stuff mfdes - puts on new spin on using the SDC, detect & pan/sluice - sort of like a quick sampling of the creek/s until you find a spot with detectable gold then you can concentrate on the area fully. Nice work & gold! :)
 
Top work mate, love the west coast. My first ever job was at Zeehan, field assistant to a geologist.
A trip is on my list as Mrs Redfin has never been to Tas.
Now i know to take the 2300.
 
Hi Jin,

I worked mostly under water and shingle banks. Most pieces were found in cracks, some in hairline cracks, and the larger piece was just in the river gravel on an area of clay false bottom.
 
mfdes said:
Hi Jin,

I worked mostly under water and shingle banks. Most pieces were found in cracks, some in hairline cracks, and the larger piece was just in the river gravel on an area of clay false bottom.

I was thinking of doing this myself but the only way I thought it might work if under water was to use a hand dredge. As cleaning out crevices under water is probably difficult. In Victoria I think they frown apon using hand dredges as they could be seen as being a mechanical device. I did see an underwater viewing device made out of pic that looks like it may help to see closer into the cracks under water though. Anyway one day I'll give it go when I have a waterproof detector.
 

Latest posts

Top