You build up lots of scraps making toys, so I thought Id turn the tables and use scraps to make some toys. Largest piece in these is 70mm x 19 x 19, smallest piece is 16mm x 16mm x 3mm
Today I MADE
- Thread starter Nugget
- Start date
Help Support Prospecting Australia:
Gold Bottle Holding Block.
The idea behind this block is to hold my bottle while I am transferring your gold from bottle to bottle especially after drying the gold and or after weighing of the gold. How you make the block, this will be shown in the below photos.
The first photo was what I was using, then I thought i can do better than that, which I feel I achieved. As they say it works for me and I do hope it will work as well for others.
Gut a length off the 4x2 about 3 inches long, come in from either end about an inch and drill the way through the block. It is a good idea to mark your drill bit the length of your bottle and drill to that mark. But do not drill through the block.
My first attempt.
What you will need a short length of 4x2 pine. A miter box, saw & drill sized to fit your gold bottles.
Gut a length off the 4x2 about 3 inches long.
Come in from either end about an inch and drill the way through the block.
The new block in use.
The idea behind this block is to hold my bottle while I am transferring your gold from bottle to bottle especially after drying the gold and or after weighing of the gold. How you make the block, this will be shown in the below photos.
The first photo was what I was using, then I thought i can do better than that, which I feel I achieved. As they say it works for me and I do hope it will work as well for others.
Gut a length off the 4x2 about 3 inches long, come in from either end about an inch and drill the way through the block. It is a good idea to mark your drill bit the length of your bottle and drill to that mark. But do not drill through the block.
My first attempt.
What you will need a short length of 4x2 pine. A miter box, saw & drill sized to fit your gold bottles.
Gut a length off the 4x2 about 3 inches long.
Come in from either end about an inch and drill the way through the block.
The new block in use.
- Joined
- Feb 18, 2018
- Messages
- 1,491
- Reaction score
- 2,870
There are some crafty buggers in this thread :Y:
- Joined
- Mar 10, 2016
- Messages
- 7,954
- Reaction score
- 16,055
Jemba said:
Grouse idea :beer: all I need is the piece of paper and gold
got all the other bits :Y:
A couple of sixties farm trucks.
Cab over tipper truck, avail for sale in classified section
My 1st setting, a bit rough, but it's a start
Had a go at making a wooden handle ,i was very happy with the results it also feels good in the hand
I think it needs a bigger knob at the end as an anti slip measure.
- Joined
- Jul 6, 2015
- Messages
- 562
- Reaction score
- 1,161
Handles I have been making for about five years .PP
PP yes i have one of yours on my other detector :Y:
Well today I made......................
A Piggy Picnic Table :lol: :lol:
A Piggy Picnic Table :lol: :lol:
Are they pets or a future gourmet meal??
Yummy.. :drooling:
Definitely pets. Plus they get rid of all our vegetable scraps and create great fertiliser.Jaros said:Are they pets or a future gourmet meal??
And also a great place to dispose of any thieves who get caught on the property
Especially when you can only take small cuts. :lol:
- Joined
- Aug 13, 2018
- Messages
- 2,060
- Reaction score
- 4,347
You should change your forum name to SwarfKing BJ
Stupid part is Im supposed to review all materials before there purchased. They havent been getting me to do it of late, and if I had of on this one part I could have saved them over 2 grand. Then they could have paid me to stay home today.
The mind boggles and the brain hurts.
The mind boggles and the brain hurts.
Similar threads
