SDC2300 Case

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
G

Guest

Was in Supercheap yesterday & they had hard cases with pick n pluck foam on special. Thought it would be great for a storage case for the SDC.
The case - 560mmx430mmx215mm - http://m.supercheapauto.com.au/Product/SCA-Safe-Case-560x430x215mm/326046
1409361874_14093609791241.jpg


Recessed for extra alkaline batteries
1409361914_14093615454694.jpg


SDC2300, charger + leads, rechargeables & headphones in place
1409361987_14093609942592.jpg

1409362032_14093610064883.jpg


A supplied case would have been nice but this one will serve the purpose. An all-in-one grab & go case that will give added protection in transit. Just need to grab it + my pick & I'm set to go for a short or extended trip.
The pick n pluck foam is a bit flimsy in places but will do the job. I'll be looking into some better glue to hold it in place better but with care it will be ok. Did stick it with some spray on glue but didn't hold the best.
If anyone knows of a strong foam glue let me know - it will save me searching :D
 
Believe it or not, Clear non acetic Silastic.
Grab a few spare pieces and try it.
Give it time to dry. It can be a bit of a bugger to stop it from slumping but with foam I do not see a problem.
 
Another alternative people may like to consider is the Irwin 500mm Builders Tool bag available from Bunnings for $15. Ive just joined the forum so probably cant post the direct link.
Everything including your harness fits nicely into these heavy duty bags that also come with a shoulder strap and pockets for accessories..

Col
 
mbasko said:
Was in Supercheap yesterday & they had hard cases with pick n pluck foam on special. Thought it would be great for a storage case for the SDC.
The case - 560mmx430mmx215mm - http://m.supercheapauto.com.au/Product/SCA-Safe-Case-560x430x215mm/326046
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361874_14093609791241.jpg

Recessed for extra alkaline batteries
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361914_14093615454694.jpg

SDC2300, charger + leads, rechargeables & headphones in place
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361987_14093609942592.jpg
https://www.prospectingaustralia.com/forum/img/member-images/655/1409362032_14093610064883.jpg

A supplied case would have been nice but this one will serve the purpose. An all-in-one grab & go case that will give added protection in transit. Just need to grab it + my pick & I'm set to go for a short or extended trip.
The pick n pluck foam is a bit flimsy in places but will do the job. I'll be looking into some better glue to hold it in place better but with care it will be ok. Did stick it with some spray on glue but didn't hold the best.
If anyone knows of a strong foam glue let me know - it will save me searching :D
Click to expand...

Geez man
A supplied case & for only $4000!!!!!!!!!!!, you don't even get a case supplied for the "Flagship" & you pay $6500 for that, expecting a little to much for $$$$ aren't you??????

Couldn't pass it up mate, you want a case I want a better ergonomic design & a charger that does not fail, to each his own hey!!!!!!!!!!
cheers
Lee
 
I didn't pay $4k for mine (even with add-ons), minor issues fixed with Black Al's cover, my charger hasn't failed & the biggest issue with the headphone cord being too short has been rectified with Nenad's adapter. Now I have a case I'm as happy as a pig in sh1t :lol:
Master Instruments must have had a batch of chargers get through without much QC? Can't really 100% blame Minelab for that but I reckon there are better/more robust C cell chargers out there that could have been supplied?
 
pebbles said:
Another alternative people may like to consider is the Irwin 500mm Builders Tool bag available from Bunnings for $15. Ive just joined the forum so probably cant post the direct link.
Everything including your harness fits nicely into these heavy duty bags that also come with a shoulder strap and pockets for accessories..

Col
Click to expand...
I looked at those http://www.bunnings.com.au/irwin-500mm-27-pocket-builders-toolbag_p5820402
Decided on the hard case as it offers a bit more protection & you can put a lock on it (to keep the honest people out :lol: ). Those Irwin bags would be good too though especially for the price.
 
Hey mbasko
Mate it was a bit of tounge in cheek humour just to emphasise we all have our own opinions & that is fine, I have no issue with you at all!!!!!

What I will say is I find it concerning that some folks won't even acknowledge that there are at least a couple of issue's that should have been sorted, I believe strongly that the potential purchaser is fully aware of these issues however minor.

Once again not having a go at you just an in general statement.
cheers
Lee

p.s. I do want an SDC but I really need a good field test to confirm if the good exceeds the issue's raised.
 
rc62burke said:
Hey mbasko
Mate it was a bit of tounge in cheek humour just to emphasise we all have our own opinions & that is fine, I have no issue with you at all!!!!!

What I will say is I find it concerning that some folks won't even acknowledge that there are at least a couple of issue's that should have been sorted, I believe strongly that the potential purchaser is fully aware of these issues however minor.

Once again not having a go at you just an in general statement.
cheers
Lee

p.s. I do want an SDC but I really need a good field test to confirm if the good exceeds the issue's raised.
Click to expand...
:lol: She's cool mate - I knew where you were coming from. I don't hide the SDC issues but I reckon they are pretty minor & fixable. Much like issues that you could point out with a GPX or any brand detector really.
Who knows maybe Minelab are listening & will release a V2 down the track?
 
mbasko said:
Was in Supercheap yesterday & they had hard cases with pick n pluck foam on special. Thought it would be great for a storage case for the SDC.
The case - 560mmx430mmx215mm - http://m.supercheapauto.com.au/Product/SCA-Safe-Case-560x430x215mm/326046
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361874_14093609791241.jpg

Recessed for extra alkaline batteries
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361914_14093615454694.jpg

SDC2300, charger + leads, rechargeables & headphones in place
https://www.prospectingaustralia.com/forum/img/member-images/655/1409361987_14093609942592.jpg
https://www.prospectingaustralia.com/forum/img/member-images/655/1409362032_14093610064883.jpg

A supplied case would have been nice but this one will serve the purpose. An all-in-one grab & go case that will give added protection in transit. Just need to grab it + my pick & I'm set to go for a short or extended trip.
The pick n pluck foam is a bit flimsy in places but will do the job. I'll be looking into some better glue to hold it in place better but with care it will be ok. Did stick it with some spray on glue but didn't hold the best.
If anyone knows of a strong foam glue let me know - it will save me searching :D
Click to expand...

Picked up one today ..... didnt quite get as much in it as you did but the essentials are there :)
 

Similar threads

M
  • Locked
SDC2300 for sale
Replies
19
Views
8K
Ramjet
Ramjet
Moneybox
What I think of our detectors.
Replies
11
Views
6K
Ridge Runner
R
Nokta Detectors
FORS Gold Review by Steve Herschbach - USA
2 3 4
Replies
60
Views
53K
nesral
N

Latest posts

Top