- Joined
- May 21, 2016
- Messages
- 578
- Reaction score
- 1,350
Hi Nenad. Some time ago you said to use. Find Patch when using a 19" Z coil, rather than go into Difficult. Would there be any advantage in running it in Extra Deep as well?
Phase Technical Videos
- Thread starter PhaseTech
- Start date
-
- Tags
- jupiter creek
Help Support Prospecting Australia:
Hi Nenad. Some time ago you said to use. Find Patch when using a 19" Z coil, rather than go into Difficult. Would there be any advantage in running it in Extra Deep as well?
Turning on patch locate in order to be able to use Normal ground type, yes definitely still recommended with any coil. Extra Deep cuts ground noise really well, but does sacrifice some sensitivity. So really depends what you are after.
I was recently working a really noisy gully with the 17x13" - reactive clays and big patches of charcoal. Was using Difficult, General and had to get my sensitivity down to about 6, but it was still a bit too much and doing my head in. I switched into Extra Deep, and it ran beautiful, and I was able to get my Sensitivity back up to 9. I knew I may miss some smaller targets, but in this instance I really preferred the smooth running. Didn't find gold, but I did dig two deep .22 leads and one shell casing, so I was happy knowing I was getting good punch.
I was recently working a really noisy gully with the 17x13" - reactive clays and big patches of charcoal. Was using Difficult, General and had to get my sensitivity down to about 6, but it was still a bit too much and doing my head in. I switched into Extra Deep, and it ran beautiful, and I was able to get my Sensitivity back up to 9. I knew I may miss some smaller targets, but in this instance I really preferred the smooth running. Didn't find gold, but I did dig two deep .22 leads and one shell casing, so I was happy knowing I was getting good punch.
- Joined
- May 21, 2016
- Messages
- 578
- Reaction score
- 1,350
Thanks for that info Nenad. I know what you mean about hot clay and charcoal! They both sound like deep targets at first. Some say switch it to difficult, and if the signal disappears, it's not a target. I try this, then dig it anyway.( Just in case! ) wiley.
Got a new video up. Searching new ground.
WalnLiz
In remembrance, April 2024
.. looks like a nice clean pendant piece...
Back to the same spot as in the last video, but took the GPZ along with the 12" Z search coil, hoping that combo would handle the ground a little better.
In my latest video I show some basic maintenance tips for the SteelPhase Pro Series headphones.
Some would also apply to many other headphones.
Some would also apply to many other headphones.
Continuing on the maintenance theme, this one shows my recommended method for cleaning the audio sockets on the sP01 enhancer. It would also apply to pretty much any headphone socket on any detector, or other gear you may be using like a Minelab wireless module.
