My prospecting gear.

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cracka

Craig
Joined
Oct 14, 2014
Messages
476
Reaction score
497
Location
Western Sydney, NSW
Just got some shots of my sluice and detectors. Redesigning the stand so its not shown. Have 2 sets of Modified Clarkson riffles, 1 set is 20mm high riffles x 12mm lip, the other set is 25mm high x 13mm lip, so i can swap them out if required. Backward tilting at 15 degrees. Also have coarse and fine expanded mesh and coarse and fine matting. Also ribbed matting under the miners moss and under the header box (dont know if i need ribbed rubber mat under header box slick plate area). The pump is a cheap ebay chinese 7.5HP 3" inlet and outlet capable of 1000 litres per minute (i run it on idle). It feeds into the metal box which seperates the water flow to 2 spraybars and feeds 2 other pipes into end of sluice. Metal box also has variable bleed off tap to control water flow to sluice. I also have a Minelab CTX 3030 detector, a Falcon MD 20 gold probe and a Minlab Pro pointer. Also numerous shovels, picks, sieves and pans and now a homemade bluebowl.

Homemade sluice ( 1850mm long x 200mm wide x 90mm high)
1413422053_rsz_2014-09-14_094937.jpg

Header Box
1413422275_rsz_2014-09-14_095000.jpg

Modified Clarkson Riffles
1413422452_rsz_2014-09-14_095014.jpg

Coarse Expanded Over Coarse Miners Moss and Fine Expanded Over Fine Miners Moss
1413422694_rsz_2014-09-14_095022.jpg

Splitter Box for water separation and flow control to spraybars & end of sluice.Also bleed-off for flow adjustment
1413423052_rsz_2014-09-14_095228.jpg

Splitter Box
1413423173_rsz_2014-09-14_095241.jpg

Two sets of Modified Clarkson Riffles (20mm x 12mm and 25mm x 13mm) -15 degree tilt
1413423393_rsz_2014-09-14_095506.jpg

Modified Clarkson Riffles
1413423538_rsz_2014-09-14_095519.jpg

7.5hp Pump 3" inlet & outlet 1000 litres/minute
1413423712_rsz_2014-09-14_095932.jpg

Pump
1413423806_rsz_2014-09-14_095944.jpg

Minelab CTX3030, Minelab Pro-Find25, Falcon MD-20 Gold Tracker
1413424008_rsz_2014-09-14_100246.jpg

Poor quality pic of gold found at Pyramul Windeyer
1413424217_2014-09-19_09.07.10.jpg
 
Just a wee bit of prospectors envy coming from this side. Loving the header box, nice collection of kit you have, so many nice choices. Bit of good ground and away you go. I'm two thumbs up for the sluice, long and skinny, top build.
 
That is one mutha of a sluice there Cracka.....looks like you got all bases covered.

Look forward to hearing about its success
 
Thanks guys,
Hey andrewmac, ive got a mate who makes them up for me. If you are interested i think they go pretty cheap so anyone who wants a quote on one let me know. The splitter box has just been modified again, added a triclover fitting so the water can enter from any side of the box. Added a garden hose connection for flush outs and to spray my mate when he overheats. :lol:

Cracka
 
Bring a chair andymac, theres plenty of room under the end of the sluice with about 250 litres of water a minute to play in if you dont wanna share a hose. :D And like i said guys if any are interested i can get a mate to make sluices to any specs just reply here or pm me.
 
Hey I didn't find your phone and by the way that Austin Martin with the dehli number plate belongs to Patrick mate and old boss Warrior
 

Latest posts

Top