Mod to my WALHB

[banksy]

I have been thinking about making this mod for a while now, I will see how it go's next weekend down at drake

 

[Tathradj]

Been thinking of doing the same thing as it would really increase the
effectiveness of the slick plate.

 

[yobskin]

Good mod... do a vid bloke.

 

[limpalot]

Be interesting to see how some "v" mat would go on it.Got to keep the colour up the full length of the sluice. Great share.

 

[josh086]

this looks like a great little mod might just have to do this myself.. have always thought the skid plate not really to efficient when a lot of the material is dropping onto the skid plate pretty close to the mesh!! walbankers are bloody awesome though

 

[Reno_86]

Any good public places to highbank at drake? or is it mostly private areas?, Im planning on doing a trip down there in a few weeks from bris. How long does it take you Banksy to get down there roughly?

 

[banksy]

reno yes let me know when , and from Brisbane about 4hs, yobskin hopefully next weekend

 

[Twapster]

https://www.prospectingaustralia.co...es/283/1474890923_20160914_144115_resized.jpg
I have been thinking about making this mod for a while now, I will see how it go's next weekend down at drake

Looks like that box has seen quite a few bits of gold slam into it!

Keep us posted on the mod and if you think it makes a difference.

 

[bundyjd]

Wondering if that will clog up at the front edge furthest from the spray bar once you've got the classifier on it.....

Is there a reason it needs to be welded in Banksy? I was thinking of doing something similar, but folding the edges down and using the existing bolts and wingnuts to hold it in place at the front. The back end of it could just rest on the folded down edges if that makes sense. A bit easier to clean up and remove any jams etc....

Cheers,
John

 

[josh086]

Wondering if that will clog up at the front edge furthest from the spray bar once you've got the classifier on it.....

Is there a reason it needs to be welded in Banksy? I was thinking of doing something similar, but folding the edges down and using the existing bolts and wingnuts to hold it in place at the front. The back end of it could just rest on the folded down edges if that makes sense. A bit easier to clean up and remove any jams etc....

Cheers,
John

I just folded one up like your describing this arvo john

 

[bundyjd]

Wondering if that will clog up at the front edge furthest from the spray bar once you've got the classifier on it.....

Is there a reason it needs to be welded in Banksy? I was thinking of doing something similar, but folding the edges down and using the existing bolts and wingnuts to hold it in place at the front. The back end of it could just rest on the folded down edges if that makes sense. A bit easier to clean up and remove any jams etc....

Cheers,
John

I just folded one up like your describing this arvo john

You should have done two mate

 

[bazxa]

I did that mod, could not pick the difference, but I was happier thinking that everything got full slick plate exposure. It already had 600mm of slick.
If it gives more confidence in your gear it's a good mod.

Barry

 

[josh086]

Haha probably should of done a few. I was thinking about putting some ur matt or somethin on it also