- Joined
- Jul 15, 2015
- Messages
- 354
- Reaction score
- 769
grubstake said:Bad link.
Mate, you need to figure out how to embed vids here (Hint: it's easy), then you can test BEFORE posting.
Steady on Grubstake...old dog...new tricks and all that.
grubstake said:Bad link.
Mate, you need to figure out how to embed vids here (Hint: it's easy), then you can test BEFORE posting.
Goldtalk Leonora said:Moneybox said:Good video thanks Tony & Lisa. I find that last bit is really hard to get because if I try to dig more off with the machine, apart from the damage to the gear, I end up with mostly hard lumps that may or may not have gold but are too hard to process through the dryblower.
Hi Phill,
You get a bit of a feel for it I find. First you need to work out if it is transported cover.....look for the presence of pisolites (black ball bearings) and then see how far you
need to jackhammer out a piece. For me....a few inches...say down to 6ish and I'm not that interested...prob just a flow that has settled, the snot has got wet over long periods of time and the gold has sunk in a bit. But pick up a nice piece down a foot or so and there is no way I would walk away without lifting the cap....it's tricky though...the laterite mineral shields like an absolute ******* and you could easily be swinging over an ounce piece down a foot and not even know it's there.
Pulling the cap is no good for dryblowing unless you added a crushing circuit....too hard. Most of the time we have had gold in cap it was all coarse and no fines anyway.
Moneybox said:I was a bit nervous heading up the dirt road at that rate :lol:
Isn't it amazing how the wind always changes after you set up. I usually have a quick look at Windy.com before I head out and then load the dryblower up wind. Goldilocks is skid mounted and self contained so I can just drag it with a chain or nudge it with the loader because I don't like working in the cloud of dust.
Thanks for giving us a look at Tiny but we didn't get to see the gold
As always.....only my thoughts and opinions but hopefully it may help someone from getting fleeced!
Enter your email address to join: