DRULE MAT slucing alternative un tested

[micksmxgold]

Bunnings wow
Here's an option I'm testing
Good ol door mat
Might be ok
Might loose gold or get more
Any hoo 12 inch wide or cut your own
You could also manipulate the circle trough to get a swirl going cut sections away to get a good flow ect
Cheap matt
I will post my observations
Let me know

 

[Moneybox]

Looks pretty good to me. There's no doubt the Dream Mat works but whether the swirls do anything I wouldn't know. That mat has enough drop-off points to catch anything big and small so it looks like a good option. It'll be easy to clean out too but you'd have to have a snug fit in your sluice to prevent losing fine gold underneath. It might work best upside down.

 

[user 4485]

Looks pretty good to me. There's no doubt the Dream Mat works but whether the swirls do anything I wouldn't know. That mat has enough drop-off points to catch anything big and small so it looks like a good option. It'll be easy to clean out too but you'd have to have a snug fit in your sluice to prevent losing fine gold underneath. It might work best upside down.

Maybe use it over miners moss?

 

[casper]

Been there.... and I found that it needs a LOT of water to have that mat clearing efficiently correction clearing at all but then again it is a tough call in a river sluice. Would be better in a High banker I imagine.
You could trim the lugs off the underside of the mat so it lays flat as I did, OR as an alternative to the tried and true miners moss lay it onto V rib mat.
I hope it works for you, i didn't persevere with it.

 

[aussiefarmer]

Not bad for gems personally prefer bread crate , not much luck with fine gold but better than a poke in the arse with stinging nettle.

 

[Packrat]

Bunnings wow
Here's an option I'm testing
Good ol door mat
Might be ok
Might loose gold or get more
Any hoo 12 inch wide or cut your own
You could also manipulate the circle trough to get a swirl going cut sections away to get a good flow ect
Cheap matt
I will post my observations
Let me know

Hello Where can I purchase some this matting ? the Dream Mat does not Impress me . Packrat .

 

[micksmxgold]

Bunnings and Clark rubber as well

 

[20x]

With a solder iron, melt an inlet into the cells..

 

[micksmxgold]

Have you had success or tried the matting out .
I was going to use melted lead painted gold droplets as gold weight with sand and gravel to test