AngerManagement
Repairs + X-pointers
Dave L your excused.
Sorry about the poor quality; but not bin diving for it.
Sorry about the poor quality; but not bin diving for it.
Can you tell me what this might be
- Thread starter AngerManagement
- Start date
Help Support Prospecting Australia:
- Joined
- Jun 18, 2013
- Messages
- 677
- Reaction score
- 478
Sorry AM, cant tell what it looks like let alone what it might be from that photo. Maybe a photo with some more light will help.
TGW.
TGW.
AngerManagement
Repairs + X-pointers
Any better.. The item is in a bin so can not take another pic... Installing an editing program now.
Might be a ink pot lid with the recessed base and the hinge piece on top? ? ?
AngerManagement
Repairs + X-pointers
Another attempt.
Goldpick
Chris Johnson
Tea pot lid? How big is it, need something for scale.
AngerManagement
Repairs + X-pointers
10cent piece
Sorry guys, i should have thought to cover that.
Sorry guys, i should have thought to cover that.
- Joined
- Nov 11, 2013
- Messages
- 137
- Reaction score
- 148
Whats is made from and area found?
The male end of a press in clasp for cloths or baggage?
was there another flange like at the top where the arrow points at the bottom? could have been the part the holds onto the fabric. if it's looks like it's snapped off it could be how it ended up on the ground.
The male end of a press in clasp for cloths or baggage?
was there another flange like at the top where the arrow points at the bottom? could have been the part the holds onto the fabric. if it's looks like it's snapped off it could be how it ended up on the ground.
AngerManagement
Repairs + X-pointers
A hint for those interested and the fact that i have miss directed everone.
It is made of rubber and was the cause of equipment failure.
I have seen hard core usage, but this was an eye opener for me.
It is made of rubber and was the cause of equipment failure.
I have seen hard core usage, but this was an eye opener for me.
flapper valve for a gas mask or something?
It's not the button of your pin pointer is it lol 
- Joined
- Oct 20, 2014
- Messages
- 586
- Reaction score
- 570
Ivo said:It's not the button of your pin pointer is it lol
That's what I'm thinking, too
- Joined
- Oct 20, 2014
- Messages
- 586
- Reaction score
- 570
Ivo said:It's not the button of your pin pointer is it lol
That's what I'm thinking, too...but not his
Goldpick
Chris Johnson
If it is a pinpointer button, then it looks to be full of dirt/mud. Did water ingress kill it due to the poor seal?
AngerManagement
Repairs + X-pointers
YES guys....
The Garrett button was almost 100% worn away...
Have seen a few with a bit of use; but this was almost 100% worn.
That little tag at the top; was all that was left of the actual button....
And when it finally popped in etc the switch was smashed...
So take care and replace your, if it is badly worn; before additional damage is done.
PS: Next time I will use a better pic and better my post.
The Garrett button was almost 100% worn away...
Have seen a few with a bit of use; but this was almost 100% worn.
That little tag at the top; was all that was left of the actual button....
And when it finally popped in etc the switch was smashed...
So take care and replace your, if it is badly worn; before additional damage is done.
PS: Next time I will use a better pic and better my post.
Yeaaaa i win lol lol what do i win lol lol
AngerManagement
Repairs + X-pointers
A replacement Garrett button, if you ever need one
Some times it is good just to have some light hearted fun 8)
Some times it is good just to have some light hearted fun 8)
Similar threads
