Tumbler for Boulder Opal

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 30, 2022
Messages
15
Reaction score
11
Location
Australia
Am needing a rock tumbler for these Opal specimens.
 

Attachments

  • 21015483-DCCD-42AA-B8E4-79F09FF91C04.jpeg
    21015483-DCCD-42AA-B8E4-79F09FF91C04.jpeg
    6.1 MB
  • 555CAB57-900B-4387-A936-0A81F7049100.jpeg
    555CAB57-900B-4387-A936-0A81F7049100.jpeg
    1.4 MB
  • C4701212-6FFC-40C2-BC40-5EFA91389F2C.jpeg
    C4701212-6FFC-40C2-BC40-5EFA91389F2C.jpeg
    2.2 MB
  • 6978BA0D-53A7-461A-952D-9A02B02C301D.jpeg
    6978BA0D-53A7-461A-952D-9A02B02C301D.jpeg
    11.7 MB
  • 3902C294-C9C2-4DDF-B1D3-839298EDABDE.jpeg
    3902C294-C9C2-4DDF-B1D3-839298EDABDE.jpeg
    2 MB
  • 59D6FF28-2446-4B2A-BA05-1B1F8A742F2C.jpeg
    59D6FF28-2446-4B2A-BA05-1B1F8A742F2C.jpeg
    1.6 MB
  • 89D209E0-BE12-40F5-B7EA-5C4E4009BF8F.jpeg
    89D209E0-BE12-40F5-B7EA-5C4E4009BF8F.jpeg
    2.3 MB
  • 1E5F0374-2390-4D69-9598-5952FD689EFF.jpeg
    1E5F0374-2390-4D69-9598-5952FD689EFF.jpeg
    3.2 MB
Can't go wrong with a Lortone tumbler if keen to do more tumbling also.
https://lapidaryslabsupplies.com.au/product/lortone-tumbler/A lapidary supplies store could also advise on media, abrasives etc. for the required stones + finish.

Another option might be to contact/join a local lapidary club & look at polishing them with one of the machines?
 
Last edited:
Tumblers are easy to make but off the shelf the "lapidary supplies store" are expensive, and dont usually hold a health volume.
I can suggest that you could look online for tumblers used in the shooting industry, links below for both.

I did buy one of these 1668467936612.png for Kato, because I know a guy that has been using one for years.
Another guy had a joint come unglued from the drum end after 18 months, but bought a spare drum.
BUT I would not use it for 'rocks'.
Jewellery or coins, YES.

If you intend to build one, YouTube has plenty of builds.
Even here in DIY's https://www.prospectingaustralia.com/threads/redneck-coin-tumbler.21916/

Lapidary - quick search
https://www.gemcuts.com.au/tumbling-machineshttps://lapidaryslabsupplies.com.au/product/lortone-tumbler/https://lapidaryslabsupplies.com.au/product/tumblers/https://www.prospectorspatch.com.au/product-category/tumbling-lapidary/https://www.gemworld.com.au/
Tumblers shooting (some are rubber lined will last for ever) - quick search
https://www.ozgunmart.com.au/hornady-m-1-reloading-brass-case-tumbler-050204https://www.northernshooterssupplies.com.au/category-s/1016.htmhttps://www.amazon.com.au/Extreme-Tumblers-Rebel-Reloading-Tumbler/dp/B00IOE5K5Y
With Ebay only buy it from someone in Australia

https://www.ebay.com.au/sch/i.html?...acat=164352&LH_TitleDesc=0&rt=nc&LH_PrefLoc=1
https://www.ebay.com.au/sch/i.html?...r+Polisher+Automatic+Machine+Tumbler&_sacat=0
 
Last edited:
I'm told this is boulder opal or more specifically Yowah Opal. Haven't had any value as it is difficult to do. But has ruby and emerald surround and is at least 100yrs old.
 

Attachments

  • 20150901_010635.jpg
    20150901_010635.jpg
    6 MB
What I have found out is that Boulder Opal is quite soft and care is needed when polishing so as not to overheat. I was told Cyrium Oxide paste is a fine polishing compound, done gently and not too fast a buffer.
 

Latest posts

Top