Moneybox's latest activity

Hi,most DIY pulse induction Coils only run 2 wires- input from machine to coil- output back to the machine a continuous loop and...

I've got some nylon bolts here somewhere for coils. If I can dig them up I'll let you know - you can have them.

I don't have any of the actual Minelab nylon bolts left but do have some I'd used on other detectors &/or as spares. They are 1/4" x 2"...

it might get there before Christmas the way it's going, almost $136 per gram now

Some times we get EMI that cannot be combatted. I think it's solar flares reaching the earth. I've been caught a few times leaving my...

Try this for size and price... Some years back when this detector was handed to me when it was first released, along with the GPZ7000...

The alternative is a Golden Orb spider…

Some features of my design will remain a secret however take note of the saw-tooth type device where the water and material enters. The...

Yes, at home.

I put my finger in the curved recess, raise it a little and slip the mat in. Same to get it out, just lift the stainless steel flap a...

It doesn't need much holding down. I just have a piece of very thin stainless steel with a downward facing lip that holds the top end...

Doug the truth is that the detector only does half the work. It only makes noises when it detects metal or mineral elements that return...

I don’t know mate at a gram an hour that would make a nice little paycheck for 40 hours playing in the dirt outside.🤣🤣🤣🤣🤣🤣🤣

I took a bit of time away from treasure hunting to find a few nuggets and while at it I was trying the same. Unfortunately there were...