Hi Guys following up on a previous thread (https://www.prospectingaustralia.com/forum/viewtopic.php?id=3473) I have taken Johns Puddler out for a test and made two very poor videos for you, sorry I got a battery warning on my camera as soon as i turned it on otherwise I would have filmed the whole process.
I took some extra photos with my mobile to help see the clean out and results.
this is the material I was running, 8 x 20litre buckets in total taken from some massive dry crevises mostly its the blue slate mud thats really hard to work in a pan.
This ground generally produces around .3 grams for every two buckets on average so 2.02 was a little under but its mine and i'm happy with that.
Initial setup vid
[video=480,360]http://www.youtube.com/watch?v=2AC6fOQjkVo[/video]
running some material through, with another intro
[video=480,360]http://www.youtube.com/watch?v=JFPuVoQe10Q[/video]
Cleaning out the unit pivots to the side
I took some extra photos with my mobile to help see the clean out and results.
this is the material I was running, 8 x 20litre buckets in total taken from some massive dry crevises mostly its the blue slate mud thats really hard to work in a pan.
This ground generally produces around .3 grams for every two buckets on average so 2.02 was a little under but its mine and i'm happy with that.
Initial setup vid
[video=480,360]http://www.youtube.com/watch?v=2AC6fOQjkVo[/video]
running some material through, with another intro
[video=480,360]http://www.youtube.com/watch?v=JFPuVoQe10Q[/video]
Cleaning out the unit pivots to the side
